Multiple services can be combined within a single project.
Diamond-disc processing of the existing floor. Old paint, dirt and loose layers are removed.
Progressive transition from coarse to fine diamond disc. A flat, homogeneous surface is achieved.
Densifier application. Floor pores are sealed, dust generation is permanently eliminated.
Bringing raised or sloped floor areas down to the required level.
A colour layer is applied to the floor for zone coding and visual organisation.
High-grade polishing from 800 to 3000 grit. Mirror-finish surface.
It is the progressive processing of an existing concrete floor with diamond discs followed by densifier application to seal the pores. No coating is required.
Epoxy requires reapplication every 3–5 years and is prone to delamination. A polished floor lasts 20+ years, needs no renewal and uses the concrete's natural hardness.
No. The densifier provides slip resistance. It is safe even in wet conditions.
Yes. The facility is divided into sections and work proceeds in phases. Your factory or warehouse continues to operate.
Applicable to concrete floors with a minimum C20 strength. The floor is evaluated during the on-site assessment.
It varies by the size of the facility. An exact timeline is provided after the on-site assessment.
Leading brands across various industries throughout Turkey and internationally.
We assess the facility on-site and provide a custom solution and cost estimate. Usually within 24 hours.
Fill in the form and we'll call you within 24 hours.
